Construction Equipment

Quality used equipment
for sale

Komatsu WA500-8E0

Komatsu WA500-8E0

Basic information
Equipment CategoriesWheel Loaders
BrandKomatsu WA500-8E0
Hours15,924 h
Select Currency 
PricePrice on request 
Serial numberKMTWA134HKHH50153
Additional informationAsset Location: Grójec, Poland.

Type Wheel loader
Make, model KOMATSU WA500-8E0
Serial number KMTWA134HKHH50153
Machine identification number H50153
Year of manufacture 2019
Counter readings 15,924 mth
Engine type SAA6D140E7
Engine power 266 kW
Bucket capacity n.a. - plate illegible
Operating weight 36,500 kg
Transport length 9,780 mm
Transport width 3,150 mm
Transport height 3,800 mm
Travel speed 38 km/h
Maximum heap height 3,390 mm
Manufacturer KOMATSU Ltd. Japan (Made in Germany)

Indications of the on-board computer: error L04 - the need to verify by a specialized service

Operator''s position - seated, heated, air-conditioned cabin
Ignition type - automatic
Engine type - diesel
Basic equipment - found an oil leak in the lower part of the engine
Hydraulic systems
(pump, wires, actuators) - no comments
Lacquer coating - operational mechanical damage
Switchboard - set
Fluid leaks - an oil leak was found in the lower part of the engine and in the vicinity of the rear axle drive axle
Machine efficiency - no remarks
Repair and maintenance of the machine - not shown
Documents identifying the machine - not presented
Documents regarding the course of the machine - not shown
Efficiency test without load - done
Core Components:
The engine with accessories is complete with no visible lacks or mechanical damage.
The engine started. The engine operation does not raise any objections - a warning and a code are visible on the screen
error L04. The need for verification by a specialized service.
Chassis components complete with no visible lacks.
Visible sweating in the area of ​​the rear drive axle.
Front axle tires GOODYEAR GP-4D 29.5 R25
Rear axle tires GOODYEAR GP-4D 29.5 R25
Tires equipped with protective chains.
Consumption percentage is estimated at approx. 30%

Yellow body with traces of mechanical damage and corrosion centers typical for
operation of this type of machines in places - on the surface of the bucket, working arm and counterweight.
The following damage was found:
- counterweight - scratched, corrosion centers,
- working arm - corrosion centers,
- entrance stairs with handrails (left and right) - abrasions of the varnish coating, corrosion centers,
- right cabin platform - dented, chipping of the lacquer coating with a corrosion center,
- internal handrail of the cabin door - scratched,
- mud shield of the front right wheel - traces of repairs, visible non-factory flat bar
securing the cover
- upholstery of the driver''s seat - worn.
One key to the ignition switch and cabin locks was presented for inspection.
The machine is equipped with:
- air conditioning,
- reversing camera,
- FOGMAKER extinguishing system,
- EBERSPACHER additional heating,
- LOADRITE L2180 weighing system,
- TU900 performance reporting system.
Send a message to the seller of this Komatsu WA500-8E0
Select contact
Arkadiusz Utnik
Inflancka 4, 00-189 Warsaw, Poland
Telephone:+48 222794781
Mobile phone:+48 602491508
My comment to the seller:
Name / Company: E-mail address: Phone number: Location:
Seller should answer by:e-mailphone